The Right Pressure for Testing Your Home's Water Pipes

It is well known that after the establishment of water channels, a weight test must be conducted to dodge future spillage issues. So, what is the common weight for testing family water channels?

Understanding Ideal Pressure Levels for Household Water Pipes

The standard weight for testing family water channels is by and large between 8-10 kg. Amid the weight test, it is basic to guarantee that there's no spillage for more than 30 minutes, and the weight drop ought to be less than 0.1 kg to be considered qualified. Note that for cold water channels amid the weight test, the weight ought to be 1.5 times the working weight but not less than 1 MPa. For hot water channels, the weight amid the test ought to be twice the working weight, but not less than 1.5 MPa.

Safeguards for the weight testing of water channels

1. Water channels ought to be weight tried after 24 hours of establishment for security and exactness in information.

2. Amid the pressure test, don't utilize an second rate quality water pump, and control the speed of pressurization to dodge harm to the water meter cover.

3. Guarantee there's no discuss within the water channels amid the weight test, as this will affect the exactness of the ultimate weight information.

4. On the off chance that the weight gage appears a critical drop in weight amid the test, halt the test and check whether the caps are fixed appropriately.

5. Check for spills at joints and caps amid the weight test. In case the gage needle does not drop or the drop is within the restrain of 0.1 kg inside the required time, the result is considered qualified.

Why conduct a weight test on water channels

1. Weight testing can decide on the off chance that the associations of the water channels are secure, hence anticipating spillage issues amid utilize. Different apparatuses are required for weight testing, such as weight gages, jacks, water tanks, hoses, etc.

2. Weight testing permits checking the establishment conditions of the channels and joints to see if the channels and valves can withstand operational pressure. The testing weight ought to be 1.25-1.5 times the working weight; in case there's no deformation, breakage, or spillage at this weight, the quality is considered qualified.

In rundown：we have presented the subject of how numerous kilograms of weight are by and large utilized for family water pipe weight testing, as well as safeguards to require amid the weight test. For those who need more information, please continue to take after our site where we are going give you with superior and more energizing substance within the future.