Home / Blog Center / Chargers / How to Effectively Reattach a Loose Floor Drain

How to Effectively Reattach a Loose Floor Drain

05/03/2025 | Hawkrown

Contact Us

When installing a floor drain, it is essential to secure it properly to ensure normal use in the future. If the floor drain accidentally comes loose, it should be reattached as soon as possible to avoid disrupting home life. So, what can be used to reattach a loose floor drain, and what should be noted during the installation? Let's take a look.

What to use to reattach a loose floor drain

A loose floor drain can be reattached using cement mortar or PVC glue. If using cement mortar, it is important to control the amount of mortar used to avoid excessive amounts and to take measures to prevent it from falling into the drainage pipe. Using PVC glue is relatively simple, and the strong sealing effect after application is quite satisfactory.

Things to pay attention to when installing a floor drain

1、It is best to install the floor drain simultaneously with the tile laying to better control the height of the drain, making subsequent drainage more convenient. Before conducting the installation, it is necessary to ensure that waterproofing has been properly handled. Simply apply the cement mortar evenly on the back of the floor drain, align it with the drainage pipe, and fit them together.

2、Since bathrooms tend to have a lot of moisture, it is crucial to create a slight slope when installing the floor drain to prevent water from accumulating indoors. If the floor drain is level with the floor, it will be difficult for future water flows to drain through it. However, the slope should not be too steep, as that would adversely affect the overall aesthetic.

3、Before installing the floor drain, necessary protective measures should be taken, such as covering the drainage pipe to prevent debris from entering and blocking it, which could cause significant issues. Moreover, the drainage pipe should not be too close to the bathroom floor, as this could impact future drainage; thus, it should be cut to be slightly lower than the floor level.

In summary:this covers what to use to reattach a loose floor drain and the important points to consider while installing one. It’s important to use proper materials to ensure the drain stays attached, thereby maintaining normal home functionality.

Submission Successful

ok