Benefits of the Whirlwind Drain Cutting Method: Why You Should Consider It

In the decoration of kitchens, bathrooms, and balconies, installing the drainage outlet is an important step. Although the drainage outlet is small in size, its selection and installation are crucial as they directly affect the drainage performance of the bathroom. There are various methods for cutting tiles around the drainage outlet, one common method being the spiral drainage outlet cutting method. So, how is the spiral drainage outlet cutting method done? What should be noted during the installation of the drainage outlet? Let’s explore these questions together!

How to Perform the Spiral Drainage Outlet Cutting Method

First, take a complete tile and use a marker to draw a spiral shape on it. Next, according to the spiral shape, use a tile cutter to cut the tile. Finally, piece the cut tiles together around the drainage outlet in a spiral shape. Once assembled, the tiles will form a spiral shape, which facilitates the flow of water.

What to Pay Attention to When Installing the Drainage Outlet

1. Generally speaking, the installation of the drainage outlet is done simultaneously with the laying of tiles. Once the waterproof inspection of kitchens and bathrooms is confirmed to be satisfactory, tiles and the drainage outlet can be installed.

2. Before installation, it is essential to determine the location of the drainage outlet. Typically, the drainage outlet is installed in the corner of the wall to facilitate drainage, and it should not be installed in the middle of the floor.

3. Prior to installation, ensure that the floor has been sloped appropriately. If the floor isn't sloped, the drainage speed will slow down during draining, making it difficult for water to flow out, easily leading to water accumulation. However, the slope should not be too steep as it can detract from the aesthetic aspect of the space.

4. Before installing the drainage outlet, it is necessary to cover the entrance of the drainage pipe and implement corresponding protective measures to prevent debris from falling into the pipe, which could cause a blockage in the future.

5. Before installation, check the distance between the drainage pipe and the floor to ensure it is suitable. If the distance is too close, the drainage pipe may need to be trimmed. The installation position of the drainage outlet must be lower than the floor to ensure smooth drainage and avoid water accumulation.

In conclusion：the above introduction to the spiral drainage outlet cutting method aims to provide some references. For more related content, please continue to pay attention to the information on our website.