Faucet Installation Made Easy: Secure Your Faucet with Confidence

Every household relies on water facilities, and faucets, as one of these devices, have become indispensable items in every home. However, many people are unsure how to secure the faucet during installation. Below, I will discuss how to fix the faucet and what to pay attention to during its installation. If you're interested, keep reading!

How to Fix the Faucet

To secure the faucet, you should first pass the water inlet hose and a white rubber pad through the bottom of the faucet. Next, place the locking nut below the two water inlet hoses. Rotate the sleeve of the locking nut to secure the faucet to the single-hole basin. Then, connect the drain and water inlet. Follow the principle of left for cold and right for hot water for the water inlet hose. Finally, wrap the threaded areas with Teflon tape (also known as plumber's tape).

What to Pay Attention to During Faucet Installation

1. When installing the faucet, the force applied should be moderate; do not use excessive force, as this may damage the faucet. Additionally, after installation, make sure to clean the surface of the faucet to maintain its aesthetic appearance and usability. If you are unsure how to install the faucet, it is advisable to hire a professional technician.

2. When installing the faucet in a new home, the water is likely to contain many impurities. Therefore, before installing the faucet, you must clean out the debris in the pipes and continuously run water until it becomes clear before stopping. Only then should you begin installing the faucet to avoid clogging the pipes, which could prevent water from flowing from the faucet.

3. During the installation of the faucet, ensure that the faucet does not come into contact with hard objects, and no cement, glue, or other debris remains on the surface to prevent compromising the shine of the faucet.

In summary, this is the information regarding how to fix a faucet. I hope it helps those in need. When installing a faucet, you can follow the steps outlined above, but it is recommended to hire a professional technician to avoid issues with improper installation that may prevent water flow.